F10SC Veterinary Disinfectant

£18.50

F10®SC is a veterinary disinfectant which achieves a broad spectrum kill of potentially harmful micro-organisms.

200ml

Quantity

F10®SC is a veterinary disinfectant which achieves a broad spectrum kill of potentially harmful micro-organisms. It is active against bacteria, viruses, fungi and spores, and environmentally effective against the protozoal oocysts of cryptosporidium, coccidia and giardia. It is an excellent product for achieving a high level of biosecurity effectively and safely as it poses no hazard to yourself and is completely safe to use in presence of animals when used at recommended concentrations.

At working dilutions it is non-corrosive, non-toxic, non-tainting and non-irritating, and is also chlorine- and aldehyde-free.



What is F10®SC used for?

  • Effective and safe general disinfection of all hard surfaces (such as tables, floors and cages)
  • For animal housekeeping procedures (such as the cleaning of food and water bowls and bedding)
  • A solution of F10®SC can be sprayed on and left to disinfect after cleaning to provide additional biosecurity
  • Fogging of entire rooms and hard to reach surfaces
  • Fogging of air spaces to eliminate air-borne micro-organisms

Note - F10®SC should be used on surfaces which are already 'clean', but need disinfecting - i.e. remove any visible dirt from the surface before use.



The recommended dilution rates of F10®SC

  • General disinfection at 1:500 (2ml in 1 litre)
  • High level disinfection against bacteria, fungi and most viruses (including coronavirus) at 1:250 (4ml to 1 litre)
  • For use against the most resistant viruses such as Parvovirus or PBFD at 1:125 (8ml in 1 litre)
  • For environmental control of protozoal oocysts (e.g. of cryptosporidium, coccidia and giardia) use at 1:100 (10ml in 1 litre)

These dilution rates mean that F10® is one of the most cost-effective disinfectant ranges on the market.



How to use F10®SC

  • Remove any dirt from the surfaces so they are visibly clean (pre-clean to optimise the disinfection process)
  • Add the required amount of F10®SC to 1 litre of water - i.e. to create a dilution rate of 1:250 add 4ml*
  • Spray or wash the surfaces/object using the solution
  • Leave to air dry - no need to rinse or wipe off the F10® solution

* 1:250 is recommended for efficiency against most pathogens. If more resistant viruses are known to be present, use at 1:125 (8ml/litre). For control of protozoal oocysts use at 1:100 (10ml/litre). For general disinfection use at 1:500 (2ml/litre).

f10sc

Specific References

16 other products in the same category